commit dc24a624fb
Author: Craig Oates <craig@craigoates.net>
Date: Fri Nov 5 15:45:36 2021 +0000
update README title.
commit ffd668b920
Author: Craig Oates <craig@craigoates.net>
Date: Fri Nov 5 15:42:15 2021 +0000
update README.
commit 3c15bf541e
Author: Craig Oates <craig@craigoates.net>
Date: Sun May 9 00:26:07 2021 +0100
change save_filtered_flickers to use writerow.
It was using writewrows before this but writerow makes it easier to
change. This is probably a nothing change but hey-ho!
commit c73f5b2d25
Author: Craig Oates <craig@craigoates.net>
Date: Sun May 9 00:19:07 2021 +0100
add fix to stop duplicating entries in find_readings_with_lights_on.
The function was originally looping through the set of readings for a
particular time-stamp. If there was more than one reading above 39, it
would append that particular time-stamp every time the if-statement
was true -- as it looped through each reading for said time-stamp.
This change adds a break and a variable to track if the time-stamp
should be added to the list -- after it has broke out of the
if-block.
commit f35fdd611a
Author: Craig Oates <craig@craigoates.net>
Date: Sat May 8 21:27:54 2021 +0100
add comments to flicker.py explaining process.
These comments explain how each 'section' works with the data. There
mostly here for when I come back to this months/years from now and
I've forgotten how this code works. The other scenarios this is for --
although very unlikely -- is other people new to the project and need
a helping hand.
commit 2e602e9082
Author: Craig Oates <craig@craigoates.net>
Date: Sat May 8 21:01:25 2021 +0100
filter readings (over herz and light levels threshold).
Having filtered down the list to readings which suppass the Hertz
threshold (4+ per-second at time of writing), the code here filters it
down even more. This bit of code searches for readings within this
already filtered list for any readings which activate the light in the
gallery (with the threshold matching that of 'gallery1' which in
anything over 39). It then proceeds to save the results.
commit 80cf014c21
Author: Craig Oates <craig@craigoates.net>
Date: Sat May 8 20:56:40 2021 +0100
add save function for filtered flickers list.
This could do with being generalised with the other save functions (in
io_services). For now, it's job is to save the list of readings which
contain four or more readings-per-second and at least one of them is
over 39. The specificness of the 39 is because the test data used is
from 'factory1' (Light Meter) and that is the threshold for triggering
the lights connected to 'gallery1' in the gallery.
commit 7bfd06cf03
Author: Craig Oates <craig@craigoates.net>
Date: Sat May 8 19:27:03 2021 +0100
implement find_flicker feature.
This functions goes through the list of readings and forms a
dictionary of time-stamps, with light readings beyond a specified
readings-per-second threshold, and the reading for said time-stamp.
The results are then saved to the specified file, using
'save_rps_totals' function.
commit 2cbecc0d2c
Author: Craig Oates <craig@craigoates.net>
Date: Sat May 8 17:25:06 2021 +0100
add save function for time-stamps with readings above threshold.
This is not exactly encoded into the code itself. It's implied and
needs to be used with that in mind. It's more of 'save list'
function. I will probably rename/refactor this in the future depending
on how the project develops.
commit 263bfe40fd
Author: Craig Oates <craig@craigoates.net>
Date: Sat May 8 17:22:44 2021 +0100
move 'data service' files to data_services file.
Part of a move to clean-up flicker.py -- making it a place to call the
functions in a way which is easy to 'switch' functions off via
comments.
commit ee0853b3dd
Author: Craig Oates <craig@craigoates.net>
Date: Sat May 8 16:37:50 2021 +0100
create data_services.py
Part of the move to clean-up flicker.py and make the code more
modular (for potential improve in REPL usage?).
commit 0f6fdc22fa
Author: Craig Oates <craig@craigoates.net>
Date: Sat May 8 16:35:50 2021 +0100
add readings-per-sec.csv file to gitignore.
It was getting in the way and doesn't need to be part of the commit
history. It's only purpose is to output the results -- to be used else
where.
commit d9742dc43b
Author: Craig Oates <craig@craigoates.net>
Date: Sat May 8 16:30:54 2021 +0100
remove redundant (save) code.
commit 9fb282db1f
Author: Craig Oates <craig@craigoates.net>
Date: Sat May 8 16:30:07 2021 +0100
move save_rps_totals function to io_services.
Part of code clean-up.
commit 26b01f38f5
Author: Craig Oates <craig@craigoates.net>
Date: Sat May 8 16:16:43 2021 +0100
tally readings per second using list of tuples.
This replaces the original way of doing it with a dictionary. The
change was brought about because the previous data loading function
was omitting duplicate entries (I.E. multiple readings from the same
second in time).
commit a4f6142137
Author: Craig Oates <craig@craigoates.net>
Date: Sat May 8 16:15:49 2021 +0100
fix string interpolation bug in print_list function.
commit b149ce3a8d
Author: Craig Oates <craig@craigoates.net>
Date: Sat May 8 16:02:14 2021 +0100
change return type to list in load_raw_data.
I made the mistake of not realising the dictionary was 'removing'
duplicate entries by simply not adding the 'second' reading for a
given time interval. An example of this is as follows,
there are two readings within the fifty-sixth second (E.G. 07:03:56)
but the second was being omitted from the dictionary storing the data
after it was loaded into memory.
I changed the return type to a list of tuples to preserve the raw part
of the data (I.E. multiple readings per second). The intention here is
so I can start from the 'raw' data without needing to load the data in
numerous times during run-time. I've omitted the 'Id' column because I
have no need for it in this context. If I do need it, though, I can
add an extra item to the returned tuple (I.E. add r[0] to append) .
This bug came about because I took most of the code from the initial
'load data' function. The original function converted the raw CSV data
into a dictionary which tallied the total readings per second before
returning it. This function doesn't do that. It leaves the data in a
more raw state.
commit 8f9df9462b
Author: Craig Oates <craig@craigoates.net>
Date: Sat May 8 15:13:22 2021 +0100
import io_services into flicker.py.
I, also, removed the load_data function. This is part of the gradual
move to transfer 'service' based functions out of flicker.py. The aim
here is to reduce the need for duplicating code or make it easier to
make function calls when needing a particular piece of data (or
transformation of data).
commit 18d0470d43
Author: Craig Oates <craig@craigoates.net>
Date: Sat May 8 15:11:32 2021 +0100
create log_services.py.
Houses a collection of print-based functions to help relay information
in the terminal. The biggest motivation for this was to make the
dictionaries easier to read when printing them in the terminal.
commit 47636b3b18
Author: Craig Oates <craig@craigoates.net>
Date: Sat May 8 15:02:07 2021 +0100
create io_services.py.
The inital services files. This provides a function to load the CSV
file of the raw test data (factory1 Light Meter).
commit 25277572c0
Author: Craig Oates <craig@craigoates.net>
Date: Sat May 8 15:00:40 2021 +0100
begin moving code to 'services'.
I've began getting into a mess with trying to use duplicated code and
data. I've began to move functions to their own services folder and
files to help reduce the duplication.
commit b93a207ba3
Author: Craig Oates <craig@craigoates.net>
Date: Sat May 8 13:13:40 2021 +0100
rename reading-per-sec-tallies.csv to readings-per-sec.csv.
Did this because for ease of typing.
commit 7c9feab1b2
Author: Craig Oates <craig@craigoates.net>
Date: Sat May 8 13:11:52 2021 +0100
put code into functions and 'main' in flicker.py.
This is just so I can start to 'turn things on and off' (via
comments).
commit 51f0d3e4bf
Author: Craig Oates <craig@craigoates.net>
Date: Sat May 8 12:52:41 2021 +0100
update file names to new test-data file names.
This is part of a previous commit which shortended the file housing
the test data.
commit f0cbce52f6
Author: Craig Oates <craig@craigoates.net>
Date: Sat May 8 12:48:40 2021 +0100
rename test data files.
Because I'm only testing and getting a proof-of-concept up and
running, the longer and more specific files is not worth the effort
right now. They are unwieldy to type and getting in the way. I've
renamed them to smaller names with the intention to use more specific
file names when things start to settle in the direction of the
project.
commit 9b87d742df
Author: Craig Oates <craig@craigoates.net>
Date: Sat May 8 00:18:10 2021 +0100
create 23-04-2021-readings-per-sec.csv ('results' file).
This file houses the data flicker.py computes/generates.
commit e04617ae13
Author: Craig Oates <craig@craigoates.net>
Date: Sat May 8 00:13:45 2021 +0100
delete original flicker.py (moved to src).
Just basic organisation. I accidently created flicker.py at the
repositories root. I meant to create it in 'src'. I'd already pushed
the commit before I spotted my mistake hence the 'mess' in the git
history.
commit dc05b3481d
Author: Craig Oates <craig@craigoates.net>
Date: Sat May 8 00:01:37 2021 +0100
create flicker.py and csv parsing code.
The code in this file is mostly to get the ball moving in this
repository. This file opens the
'light-meter-sample-readings-23-04-2021-ritherdon.csv' file and
tallies-up the number of requests per second groups. After that, it
writes the results to 23-04-2021-readings-per-sec.csv.
As an example (to help explain), it counts and stores how many times
the light meter (factory1) took a reading at the rate of two times per
second. In this instance, there were 2955 instances of the light meter
taking two readings per second. This roughly equates to 10% of the
days readings was at a rate of two requests per second. 28% of the
time the light meter was recording at four requests per second, 18%
for one and 44% for three.
commit 77ee5318ec
Author: Craig Oates <craig@craigoates.net>
Date: Fri May 7 23:59:10 2021 +0100
create 'lite' sample data set.
The main file I was using was too big and taking too long to
process. Whilst I got things moving in this repository, I removed a
lot of the data to help speed-up the development process. This should
be a temporary file and I expect this to be deleted at some point in
the future.
commit aeaf2dc258
Author: Craig Oates <craig@craigoates.net>
Date: Fri May 7 20:27:02 2021 +0100
create flicker.py.
This is the 'main' file if you will.
commit 734097fcc9
Author: Craig Oates <craig@craigoates.net>
Date: Fri May 7 20:17:24 2021 +0100
import initial light meter readings 23-04-2021.
This is a .csv file and will be used and the initial test data this
project will aim to breakdown into a list of readings for each
second. At the moment, I'm being vague with my desciption of what
'breakdown' means here because this is just a proof-of-concept. I
don't expect this file to remain around for too long in the
repository.
commit 0078370093
Author: Craig Oates <craig@craigoates.net>
Date: Fri May 7 20:16:01 2021 +0100
create requirements.txt.
Craig Oates